RetainedAustenite相关论文
Prediction and evaluation of optimum quenching temperature and microstructure in a 1300 MPa ultra-hi
The quenching and partitioning steel is the representative of the third generation of advanced high-strength steel.The e......
Effect of Heat Treatment on Microstructure and Mechanical Properties of Quenching and Partitioning S
In order to investigate the effect of microstructural characterization on the mechanical properties and retained austeni......
Quantitative Analysis of the Crystallographic Orientation Relationship Between the Martensite and Au
...
To investigate the transformation behavior of TRIP steel retained austenite under cyclic load, cyclic V-bending deformat......
A novel design scheme of hot stamping, quenching and partitioning process was conducted in a quenchable boron steel to o......
Effect of Direct Quenching and Partitioning Treatment on Mechanical Properties of a Hot Rolled Strip
...
...
In this work,acryogenic rolling process was appliedto a 3Mn-1.5Al TRIP steel.Microstructure characterization was carried......
Microstructure and mechanical properties of low carbon medium-manganese (0.2C -7Mn) steel during ART
This paper deals with the effect of austenite reverted transformation ( ART) annealing time on microstructure and mechan......
CHARACTERIZATION OF THE MULTI-PASS WELD METAL AND THE EFFECT OF POST-WELD HEAT TREATMENT ON ITS MICR
In multi-pass welding process,various thermal cycle of both weld metal(WM)and heat affected zone(HAZ)will be subjected s......
The retained austenite content in TRIP590 steel was first measured by X-ray diffraction(XRD)method.Then,the effect of di......
The effect of austempering time after the bainitic transformation on the microstructure and property in a low-carbon bai......
Partitioning of nitrogen atoms and its effect on retained austenite content in an ultra-low-carbon C
The partitioning of nitrogen atoms and its effect on the retained austenite content(RAC)during quenching and partitionin......
近些年来,汽车厂商在汽车上越来越多的使用热成形件。热成形件拥有很好的碰撞性能并能降低能耗。22MnB5热成形QP钢最有望达到此目......
THE CHARACTERISTICS OF MICROSTRUCTURES AND PROPERTIES FOR ADVANCED ALUMINUM/SILICON CONTAINED HOT-RO
The microstructure characteristics with super fine ferrite grain size less than 5mm,appropriate retained austenite fract......
The systematic chemical compositions including common C, Si, Mn, Al, and micro- alloying elements of Ti and Nb were desi......
采用微观分析方法探讨了新型铸造热锻模具钢(CHD钢)的强韧化机理.研究表明,CHD钢具有较高的强韧性和高温稳定性,其组织为具有高密......
研究了Ｃｒ１２型工具钢深冷处理后的耐磨性和残留奥氏体的作用。结果表明，深冷处理可扩大获得高硬度的淬火、回火温底范围，≥６０ＨＲＣ的淬火温度范围......
